A conventional fire alarm control panel (FACP) is a fire alarm system that uses circuits with hardwired devices, such as pull stations, heat detectors, and smoke detectors. When one of these devices detects a fire, it sends a signal to the control panel, which activates the alarm system. Conventional FACP systems are typically easier to install than addressable fire alarm systems, as they don't require as much programming and setup.

Conventional Fire Alarm Control Panel

SKU: 317

Conventional fire alarm panels represent a more traditional approach to fire protection systems, and they are prevalent in commercial settings as the most common type of fire alarm system. Despite technological advancements, conventional panels, being analog systems, continue to be a preferred choice in numerous scenarios.

To order, please email us at sales.stanhope@gmail.com or fill out our online form.
You may also call us via (632)-89612255 / (632)-89612256 / (632)-89612257.
2,4,8,16 Class B Initiating Device Circuits (IDCS)

All zones accept conventional detectors and any normally open contact device.

1-4 Class B Notification Appliances Circuits(NIACS)

One form alarm Relayn, rouble elay and supervisory relay,

3.0amps of system power.

Sound output can be disavles

Manual active sound output enabled,

Able to report short and broken circuit of detection zones,

Designed with standby batteries and space provisoins for two sealed lead acid batteries.

Testing and disable functions.

Can connect maimum 32 repeater panels by RS485 communication port.

Max 30 conventional detectors in one zone.

Auto/ Manual mode setting enable walk test,

Each sone can be disables.

Panel Dimensions (mm) (L*W*D): 4 to 16 Zones: 370*440*100

Panel Weight [Without Batteries]: 4to 16 Zones: 6.6kg/2 Zones: 2.2kg